Reliable and quiet, the ergonomic carry handle of the lightweight BF2.3 allows the Honda experience to be enjoyed anywhere, anytime!
Not only does the BF2.3 pack enough punch to push a boat out to sea, it's light enough to be carried back to the car! Thanks to the ergonomic carry handle fitted to each engine, the BF2.3 can be taken Virtually anywhere.
Despite the engine's size, the BF2.3 boasts all the benefits of Honda's advanced four-stroke Technology, which is second to none.
The BF2.3 is the lightest 2.3hp four-stroke available - even lighter than most two-stroke outboards!
The Honda BF2.3 comes standard with a centrifugal clutch. As a result, the engine is able to maintain a smooth idle and automatically engage the prop above idle speed when the throttle is advanced. It’s like having a neutral position.
A twist grip throttle also allows for precise throttle control, and the throttle tensioner minimises driver fatigue.
With an easy-to-maintain, compact design allowing for easy transportation and storage, these features mean you can spend less time worrying
about your engine, and more enjoying the outdoors.
The ease of transporting the BF2.3 makes it perfect for inflatable boats like the Honwave, as well as small tenders and canoes.
The engine provides excellent manoeuvrability in tight areas. There's more reverse thrust, meaning you can get to where you want to go faster!
The BF2.3's Shallow Water Drive also allows you to run in shallow water and greatly reduces the risk of engine damage.
INTEGRAL FUEL TANKSPECS
A 1L integral fuel tank facilitates easy removal and portability as one unit. The vent is able to be closed during transport or for extended storage
periods. The engine can run for up to 55 minutes at full throttle on a tank of fuel.
It features the proven reliability and superior fuel efficiency of Honda's world-renowned four-stroke quality, and there's no oil mixing either. Take that, messy two-stroke competitors!
The BF2.3 comes with a industry-leading 5 Year Warranty, and with 100 authorised Honda dealers around Australia, service and maintenance is a breeze!
Maintenance-free, high-energy output for quick and easy starts.
FORCED AIR-COOLED ENGINE
No water pump to worry about being plugged with weeds or damaged by sand. Runs in the shallows!
FRONT MOUNT CARRYING HANDLE
Provides superior portability and ease of installation.
CORROSION PROTECTION SYSTEM
A patented, 'double sealed' multi-layered paint process. Sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.
STEERING FRICTION ADJUSTMENT
Adjust steering tension for ease in manoeuvrability
ENGINE TYPE 4-stroke OHV 1-cylinder / 2-valves
BORE & STROKE 45 x 36 mm
FULL THROTTLE RPM RANGE 5,000-6,000 RPM
RATED POWER 2.3HP @ 5,500 RPM
COOLING SYSTEM Forced air
INDUCTION 1 carburettor
IGNITION SYSTEM Transistorised Pointless
STARTING SYSTEM Recoil
EXHAUST Under water, above propeller
TRIM RANGE 4-stage 5 - 10 - 15 - 20
TILT RANGE 75
EMERGENCY STOP SWITCH Standard
GEAR RATIO 2.42:1
GEAR SHIFT 360 pivot
PROPELLER 3-blade plastic
DIAMETER X PITCH (STYPE) 7-1/4 x 4-3/4 inches
DIAMETER X PITCH (LTYPE) 7-1/4 x 4-3/4 inches
OVERALL LENGTH 410mm
OVERALL WIDTH 280mm
OVERALL HEIGHT (S-TYPE) 945mm
OVERALL HEIGHT (L-TYPE) 1,100mm
OVERALL HEIGHT (X-TYPE) n/a
TRANSOM HEIGHT (STYPE) 418mm
TRANSOM HEIGHT (L-TYPE) 571mm
TRANSOM HEIGHT (XTYPE) n/a
DRY WEIGHTS (S-TYPE) 12.2kg
DRY WEIGHTS (L-TYPE) 12.7kg
DRY WEIGHTS (X-TYPE) n/a